Minebea CSD-904-EX - Page 92

81
⑦ Writing the comparative data (Host → CSD-904-EX)
2 4 6 8 10 12 14
@ 0 0 6 0 Terminator
At normal operation
Return (CSD-904-EX → Host)
2 4 6 8 10 12 14
@ 0 0 6 0 Terminator
At abnormal operation
Return (CSD-904-EX → Host)
2 4 6 8
@ 0 0 E R 1 3 Terminator
● The setting data enters from the right end.
● Don’t add the decimal point.
The condition of the error transmission becomes as follows.
● When there is a disagreement in the scale interval value.
● When you set the value which exceeds ±999 999.
● When you set characters other than the numerical value in the set value.
● When you set characters other than +/- in the sign part.
Address
00～31
Command No.
Sign
Set value
Command No.
60
69
61
65
66
67
68
Operation
Writing upper limit value(HI)
Writing lower limit value(LO)
Writing target value(SET0)
Writin
g
p
re-set value(SET2)
Writing fall value(SET1)
Writing near zero value(SET3)
Writin
g
fixed tare wei
g
ht value
Address
00～31
Command No.
Sign
Setting value
Address
00～31