10. Usage
MiR200 User Guide (en) 10/2020 - v.3.1 ©Copyright 2017-2020: Mobile Industrial Robots A/S. 128
6. Select OK to create the marker. The marker is now visible on the map.
You can make the robot dock to the marker by selecting it on the map and selecting Go to.
The marker can also be used in missions.
10.2 Creating positions
The following steps describe how to create a position on a map. In this example, we are
creating a Robot position .
1. In the robot interface, enter the map editor of the map where you want to create a
position. This is done by going to Setup > Maps and selecting Edit next to the map you
would like to work on.
To Next Page
Loading...
