5. Battery and charging
MiR200 User Guide (en) 10/2020 - v.3.1 ©Copyright 2017-2020: Mobile Industrial Robots A/S. 46
5. Battery and charging
The robot is powered by a lithium battery that can be charged with a MiR cable charger or a
MiR Charge 24V charging station.
5.1 Charging the robot
This section describes how to charge MiR200 using a MiR cable charger.
The robot is delivered 40-60% charged.
To avoid fast discharging and depleting the battery, we recommend that you
turn off the robot while charging with a cable.
If you are charging two robots right after each other with a cable, wait
approximately one minute between unplugging the first robot and plugging in
the second. This will ensure that the charger registers that a new robot is
being charged.
To Next Page
Loading...
