13. Packing for transportation
MiR200 User Guide (en) 10/2020 - v.3.1 ©Copyright 2017-2020: Mobile Industrial Robots A/S. 153
13. Packing for transportation
This section describes how to pack the robot for transportation.
13.1 Original packaging
Use the original packaging materials when transporting the robot.
Figure 13.1. The packing materials.
The packaging materials are:
• The bottom of the box (the pallet)
• The lid of the box (the ramp)
• The walls of the box
• Protective foam blocks: Side blocks and the top layer
• Protective corner braces. The braces prevent the robot from being damaged by the
transport straps
To Next Page
Loading...
