4. Getting started
MiR200 User Guide (en) 10/2020 - v.3.1 ©Copyright 2017-2020: Mobile Industrial Robots A/S. 30
The box contains:
• The MiR200 robot
• The robot kit which contains:
• One Emergency stop box, external antenna, and four pcs. M10x40 bolts
• One charging cable
• One external charger, 24 V DC, 10 A
• A MiR200 document folder containing a USB flash drive and the following printed
documents:
• MiR200 Quick Start
• The CE Declaration of Conformity for your robot
• Getting the robot online
• Passwords
• The unique nameplate for your robot
• The USB flash drive in the document folder has the following content:
• MiR200 User Guide
• MiR200 Quick Start
• MiR Network and WiFi Guide
• MiR Robot Reference Guide
• MiR Robot REST API Reference
• Getting the robot online
• CE Declaration of Conformity
4.2 Unpacking MiR200
This section describes how to unpack the robot.
Keep the original packaging for future transportation of MiR200.
Follow these steps to unpack the robot:
1. Place the box with the robot so that there is three meters of free space at the front or the
back of the box. This is necessary as the robot drives out of the box on a ramp.
2. Cut the protective straps surrounding the box.
3. Remove the lid from the box.
To Next Page
Loading...
