12. Maintenance
MiR200 User Guide (en) 10/2020 - v.3.1 ©Copyright 2017-2020: Mobile Industrial Robots A/S. 152
Part Maintenance Interval
and nameplate label, and nameplate on the
robot are still intact and visible.
replace as needed.
CAUTION
If the robot has been impacted it may be structurally damaged, causing a risk
of malfunction and injury to personnel.
• If you suspect the robot has suffered any damage, you need to conduct a
thorough inspection to ensure that the robot's strength and structure is not
compromised.
12.3 Battery maintenance
The battery is generally maintenance-free but should be cleaned if it gets very dirty. Before
cleaning, the battery must be removed from any power source. Only use a dry and soft cloth
to clean the housing of the battery, and do not use abrasives or solvents.
For storage of the battery, see Battery storage on page50.
For disposal of the battery, see Battery disposal on page50.
To Next Page
Loading...
