MIR 200 - Packing the Robot for Transportation; Battery

13. Packing for transportation
MiR200 User Guide (en) 10/2020 - v.3.1 ©Copyright 2017-2020: Mobile Industrial Robots A/S. 154
13.2 Packing the robot for transportation
Before packing the robot for transportation:
• Shut down the robot—see Shutting down the robot on page45.
• Disconnect the battery—see Disconnecting the battery on page48.
To pack the robot, repeat the steps in Unpacking MiR200 on page30 in the reverse order.
NOTICE
Pack and transport the robot in an upright position. Packing and transporting
the robot in any other position voids the warranty.
13.3 Battery
The lithium-ion battery is subject to transport regulations. Make sure that you follow the
safety precautions in this section and the instructions in Packing for transportation on the
previous page. Different regulations apply depending on the mode of transportation: land,
sea, or air.
Contact your distributor for more information.
CAUTION
Lithium-ion batteries are subject to special transportation regulations
according to United Nations Regulation of Dangerous Goods, UN 3171. Special
transport documentation is required to comply with these regulations. This
may influence both transport time and costs.