11. Applications
MiR200 User Guide (en) 10/2020 - v.3.1 ©Copyright 2017-2020: Mobile Industrial Robots A/S. 146
11. Applications
You can install top modules on top of MiR200 for specific applications. For more information
about top modules, see the MiR website.
Top modules from MiR are delivered with Operating guides with instructions on how to
mount them on and operate them with the robot.
For detailed instructions on how to mount top modules and accessories, contact your
distributor.
11.1 Mounting a top module
Top modules must be fastened using the self-tightening conically shaped mounting holes in
each corner of the robot and should be mounted with a tightening torque of 47 Nm.
Figure 11.1. Top modules are fastened through the mounting holes in the top cover.
To Next Page
Loading...
