Handling Calls
1. Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
2.
Press the Xfer or softkey(if configured).
3.
Press the key and highlight a directory entry (or the desired number if the entry contains more than
one number).
Note:
If you have any additional Directory sources configured, you will need to first navigate to the
desired Directory folder and then highlight the respective entry or number.
4. To complete a consultative transfer, press the select button to call the contact. Remain on the line to
speak with Party 2 before pressing the Xfersoftkey again to transfer Party 1 to Party 2.
To cancel the transfer, press the Cancelsoftkey on the display screen or press .
Version 1.0
127 User Guide
To Next Page
Loading...
