Mitel SX-200 - 2 Circuit Card and Maintenance; Equipment Cards; IPC Card

SECTION MITL9105/911 O-096-350-NA
.:.
.:...
-.
.
I..
300/1200 BAUD _
. .
, :i
/ -.l
ON THE SIDE OF ’
THE CARD:
STOP BIT,
PARITY WORD
c=
.ENGTH SWITCHES
SCANNI
CARD
DATA
-- OUTPUT
INDICATOR
ER
CONSOgRNTROL IPC
CARD
E
1
I I
$
l.LED INDICATES RCP CONNECTED l.LED INDICATES RCP CONNECTED
::
4-
AND DATA BEING SETAND DATA BEING SET
--Z.LED LIT, INDICATES DIAGNOSTICS --Z.LED LIT, INDICATES DIAGNOSTICS
‘5.LED LIT, AL3 (CHECKSUM OR RAM ‘5.LED LIT, AL3 (CHECKSUM OR RAM
FAILURE DURING 1NITlALIZATlON) FAILURE DURING 1NITlALIZATlON)
THUMBWHEEL
SWlTCHES
WRITE-
_ PROTECT
AND BUSV-
OUT SWITCHES
CHANNEL
INDICATORS
RMAT REMOTE
QUAD-
DUAL- TONE
LINE
CONTROL CARD RECEIVER CARD RECEIVER CARD
CONTROL CARD CARD
x6496
Figure 2-2 Equipment Cards
Page 6