Mitel SX-200 User Manual

I$~lj{~~
ig
SECTION MITLSI OS/91 1
O-096-350-NA
;,yy
:,::::
,
g, ~.
@ifif
G
+
::>:q:
::::::\:
y.:+
APPENDIX D
::~.-’
:<.:..t
$\,!...
SX-100 MECHANICAL INFORMATION
GENERAL
D1.O1 The MAPS
contained in this Appendix detail the procedures to
be performed in all mechanical work on the SX-100 system.
These MAPS are used in conjunction with the MAPS
outlined in other
sections of this Practice.
D1.02 Due to the similarity of the SX-100 system to the SX-200
system, MAPS
350-501, 350-510 and 350-511 are common for
both systems and these MAPS will be found in Appendix E.
Dl.03
There are three versions of the SX-100 system: rack-mounted,
wall-mounted and cabinet-mounted. MAP350~400
deals with
exposing each of the three versions of the system for mechanical
work.
D1.04 The basic synopsis of these MAPS
is that if a component has
been found to be defective, replace it. MAPS
in this Appendix
describe how to replace a part which is known to be defective.
Loca-
tion of the defective components is the topic of Appendices F and G,
Parts 5 and 6.
,..:.
TABLE Dl-1
SX-100 MECHANICAL PROCEDURE
Title Reference
Expose System MAP350-400
Replace Interconnect, Power Fail Transfer and Console Interface Card MAP350-40 1
Replace Equipment Shelf
MAP350-402
Replace Power Supply
MAP350-403
Replace Reserve Battery Backup Unit
MAP350-404
Replace Maintenance Panel
MAP350-405
Replace 220 V Adapter
MAP350-406
Page D-1/2

Mitel SX-200 Specifications

General

Brand	Mitel
Model	SX-200
Category	Controller
Language	English