SECTION
MITL9105/911
O-096-350-NA
TABLE 4-l
SUPERVISOR FUNCTION ACCESS CODES
These codes assume the use of
x
as the Supervisor Function code (Feature Number 18). For
Supervisor Function codes used in Traffic Measurement, see Section
MITL9105/9110-096-
450-NA.
To cancel all call forwarding:
(a) Dial
~1,
or
~11.
(b) Dial
#.
(c) Press RELEASE button.
To access an individual trunk:
(a) Dial
~20.
(b) Dial individual trunk access number
(equipment number).
(c) Dial
X.
(d) Press RELEASE button.
(d) Press RELEASE button.
To make trunk group extension and
Supervisor access:
(a) Dial
~6.
(b) Dial trunk group (1 through 10).
(c) Dial
#.
(d) Press RELEASE button.
To change the Direct Inward System Access
Code:
To force-release an individual trunk:
(a) Dial
~20.
(b) Dial individual trunk access
n.umber
(equipment number).
(c) Dial
###.
(d) Press RELEASE button.
(a) Dial
*7.
(b) Dial
DISA
code.
(c) Press RELEASE button.
To cancel a minor alarm (Note 1):
(a) Dial
~8.
(b) Dial
#.
(c) Press RELEASE button.
To make flexible night service assignments
(Note 3):
(a) Dial
~3.
(b) Dial individual trunk access number
(equipment number).
(c) Press NIGHT 1 or NIGHT 2.
(d) Dial extension number.
(e) Press RELEASE button.
To busy out an individual trunk (Note 3):
(a) Dial
x9.
(b) Dial individual access number
(equipment number).
(c) Dial
x
.
(d) Press RELEASE button.
To cancel all system callbacks:
(a) Dial
~4.
(b) Dial
#.
(c) Press RELEASE button.
To set the clock time:
To debusy an, individual trunk (Note 3):
(a) Dial
x9.
(b) Dial individual trunk access number
(equipment number).
(c) Dial
#.
(d) Press RELEASE button.
(a) Dial
~5.
To change the status of all occupied clean
(b) Dial time (2-digit hour plus 2-digit
rooms to occupied and needs cleaning:
minutes).
(a) Dial
~10.
(c) Dial
x
for PM; otherwise AM.
(b) Dial
x
.
(d) Press RELEASE button. (c) Press RELEASE button.
To make trunk group Supervisor access To change the status of all occupied rooms
only:
in the need of cleaning to occupied clean:
(a) Dial
~6.
(a) Dial
~10.
(b) Dial trunk group (1 through 10). (b) Dial
#.
(c) Dial
x
. (c) Press RELEASE button.
Page 32
To Next Page
Loading...
