SECTION
MITL91
OS/91
1
O-096-350-NA
1. GENERAL
Introduction
1.01
This Section contains information to be used when trouble-
shooting the SX-lOO/SX-200 Automatic Call Distribution Sys-
tem. The Practice is divided into seven parts and nine appendices:
a
Part 1. General
-
gives a brief outline of the Practice and a
general introduction to the troubleshooting philosophy.
l
Part 2. Maintenance Aids
-
describes the maintenance aids
provided by the system and gives a description of each indica-
tor, switch and display.
l
Part 3. Console and Test Line Functions
-
contains a descrip-
tion of the maintenance functions which can be dialed from the
console or the test line.
l
Part 4. Error Code Troubleshooting
-
describes the trouble-
shooting procedures to be used in conjunction with the system
error code displays.
l
Part 5. Fault Report Troubleshooting
-
this Part details trou-
bleshooting procedures to be used when no error code is re-
ported.
l
Part 6. SX-lOO/SX-200 Power Supply Specifications
-
defines
the electrical and operational specifications for the
SX-
1
OO/SX-200
system power supplies.
0
Part 7. RMATS
-
this Part briefly discusses RMATS. For further
information, see Section
MITL9105/91
lo-098-lOl-NA.
l
Appendix A
-
MITEL
Action Procedures (MAPS).
a
Appendix B
-
provides a series of tables of all system param-
eters.
l
Appendix C
-
provides installation and cabling information for
the SX-lOO/SX-200 system.
l
Appendix D
-
contains the mechanical information pertaining
to the SX-100 system in the form of
MAPS
and tables.
0
Appendix E
-
contains the mechanical information pertaining
to the SX-200 in the form of
MAPS
and tables.
l
Appendix F
-
contains all power checks pertaining to the
SX-lOO/SX-200 system in the form of
.MAPs
and tables.
0
Appendix G
-
details, in the form of MAPS, the procedures
required to locate and fix malfunctions in the systems.
Page
1
To Next Page
Loading...
