SECTION MITL9105/91 lo-096-350-NA
._
/-- _
.
APPENDIX H
THE SUPERSET 4 SET
GENERAL
Introduction
H1.O1 This Appendix describes the general, physical and electrical
characteristics of the SUPERSET 4 set.
H1.02 It also includes a brief description of the major features, and
the installation and maintenance considerations. Other details
are included in the MITEL Practices listed in Table Hl-1.
GENERAL DESCRlPTlON
H1.03 The SUPERSET 4 set is an advanced microprocessor-controlled
telephone set, employing digitally controlled integrated circuitry
and liquid crystal displays (LCDs).
(.
.’
H1.04
H1.05
(a)
04
(4
(d)
(e)
(4
(9)
The SUPERSET 4 set is intended for use with the SX-
1 OO/SX-200 Generic ACD system.
The SUPERSET 4 set provides:
User confidence in handling incoming or outgoing calls,
through application of visual word prompts automatically dis-
played on a LCD. These prompts signify all valid call-handling
options at any given time.
User capability to make the fullest use of all system features in
the assigned Class of Service, by means of the visual word
prompts mentioned above.
Single button feature activation.
Multiline appearances (installer-programmed) of up to 15 lines
including primary line (set directory number). Multiline appear-
ances may be a mixture of system lines and trunks, and may
also be multi-appearances of the same line.
Speed call entry at each unassigned line (not associated with
system speed call feature).
Visual line or trunk status indication by means of LCD symbols
adjacent to each line select button.
Automatic selection of primary line.
Page H-l
To Next Page