SECTION MITL9105/911 O-096-350-NA
TABLE Hl-1
RELATED MITEL PRACTICES
:-
:._
._.
.._
Section No.
MlTL9105/91 lo-096-107-NA
MITL9105/91 lo-096-180-NA
MITLS 105/911 O-096-ZOO-NA
MITLS 105/9 11 O-096-320-NA
Title
SUPERSET 4 Features and Services Description
Engineering information
Shipping, Receiving and Installation Procedures
Extension Test Procedures
-.
U-0
0)
(i)
WI
Pushbutton selection of nonprimary line.
Automatic ringing line selection (System programmed option).
Hold function for any call at the set.
(1)
(ml
Ease of installation. No power supply required other than that
derived from the system and distributed through the line. Line
connection by means of modular jack Only 2-wire local area
wiring required. Turn key installation. Only nonessential user
programming required.
. . .
User programming of timed reminder, call forward destination
number and speed call entry.
16-character alphanumeric display for time-of-day and date
(provided by system), digit echoing, speed call number, call
forward destination number, timed-reminder setting, caller
identification and messages from the system.
(n)
Handsfree operation, with switchable microphone.
(0)
Volume controls for ringer and loudspeaker.
(P)
Ringer pitch control.
PHYSICAL DESCRIPTION
General
H1.06 The SUPERSET 4 set body and handset are of plastic construc-
tion. The dimensions of the SUPERSET 4 set, with handset
on-hook, are given in Figure Hl-1.
H1.07 The body and handset are interconnected via a modular de-
tachable handset cord, plugged into the side of the body. Line f
connection to the set is by means of a captive 2-wire line cord,
terminated in a modular plug.
Page H-2
To Next Page