4 CONNECTING THE SERVO AMPLIFIER AND ROTARY SERVO MOTOR
4.2 Wiring
47
4
*1 For MR-AENSCBL_M-_, refer to the following.
Page 83 MR-AENSCBL_M-_
*2 Use of the following connectors is recommended:
*3 This connection is for the MR-J5 3-axis servo amplifier.
Junction connector Description IP rating
a) Junction connector for extension cable IP67
b) Junction connector for motor power
cable
IP67
Connector: CE05-6A18-10SD-D-BSS
Cord clamp: CE3057-10A-2-D
(DDK Ltd.)
The number varies depending on the cable OD.
Connector: D/MS3101A18-10P(D263)
Backshell: CE02-18BS-S-D
Cord clamp: CE3057-10A-3-D
(DDK Ltd.)
The number varies depending on the cable OD.
To Next Page
Loading...
