Mitsubishi 4G1 series General Information

4G1 ENGINE (E-W) -
Rocker Arms and Camshafts
11A-8-11
PWEE9520
E
Nov. 1995Mitsubishi Motors Corporation
(6) Rotate clockwise the crankshaft one complete turn (360
_
degree).
(7) Adjust the valve clearance at points as shown in the
illustration.
(8) Repeat steps (3) to (5) to adjust the valve clearance
of remaining valves.
(9) With the engine mounted on vehicle, warm up the engine.
Then, check for valve clearance on hot engine and adjust
if necessary.
Standard value: on hot engine
Intake 0.20 mm
Exhaust 0.25 mm
Timing belt side
PWEE9520-D
E
Aug. 2000Mitsubishi Motors Corporation Added

Mitsubishi 4G1 series Specifications

General

Brand	Mitsubishi
Model	4G1 series
Category	Engine
Language	English