15
15-39
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Work before removal
Alignment mark
• Put alignment marks on the coupling, turbine housing, compres-
sor cover and cartridge assembly.
Removal procedure
Removal: Nozzle
• Remove the flange and nozzle in one unit from the turbine hous-
ing.
• Remove the clamp bolt, then remove the nozzle from the flange.
Mark Parts to be tightened Tightening torque Remarks
Bolt (bracket mounting) 34 to 38 {3.5 to 3.9} Wet
Clamp bolt 6.4 to 7.4 {0.65 to 0.75} Wet
Bolt (clamp plate mounting) 25.5 to 27.4 {2.6 to 2.8} Wet
Mark Points of application Specified lubricant and/or sealant Quantity
Threads of clamp bolt
Seizure preventive compound
(FEL-PRO CA-5)
As required
Threads of mounting bolt
O-ring Engine oil As required
Mitsubishi 6M70 Engine Parts contact:
email: EngineParts@HeavyEquipm
entRestorationParts.com
Phone: 269 673 1638
To Next Page
Loading...
