Mitsubishi FX1N Series Programming Manual

FX Series Programmable Controlers Applied Instructions 5
5-204
5.16.1.1.9 Relationship between EXTR K12/K13 and A500/E500/S500 series
The following page is from the Data COD list of the FR A500 series instruction manual, IB(NA)-
66790-G.
The following example displays how to read
the parameter from the inverter.
The following example displays how to write
the parameter to the inverter.
The following example reads the Base
Frequency from the 2nd inverter station and
stores this value to D100.
The following example writes K5600 to the Base
Frequency in the 2nd inverter station.
The data is calculated
by the PLC in
accordance with the
parameter.
EXTR K12 K(Station No.) K(Parameter No.) D****
EXTR K13 K(station No.) K(Parameter No.) K****
EXTR K12 K2 K3 D100
EXTR K13 K2 K3 K5600

Mitsubishi FX1N Series Specifications

General

Programming Language	Ladder Logic
Output Type	Relay, Transistor
Operating Temperature	0 to 55°C
Power Supply	100-240V AC or 24V DC
Program Capacity	8K steps
Communication Ports	RS-422
Data Memory	8000 words
High-speed Counters	Up to 6 channels
Expansion Modules	Available
Pulse Output	2 points