Mitsubishi FX1S Series

FX Series Programmable Controlers Applied Instructions 5
5-166
M8145 : Y000 pulse output stop (immediate)
M8146 : Y001 pulse output stop (immediate)
M8147 : Y000 pulse output monitor (BUS/READY)
M8148 : Y001 pulse output monitor (BUS/READY)
g)When a Mitsubishi MR-H or MR-J2 servo amplifier equipped with absolute position detection
function is used, the current position of the servo can be read by FNC 155 (ABS).
• Dog search function is not supported. Start zero return from the front side of the Near point
signal.
• Attention should be paid to the instruction drive timing.