Mitsubishi FX1S Series User Manual

i
FX Series Programmable Controllers
Programming Manual
Manual number : JY992D88101
Manual revision : C
Date : Sep. 2001
FX Series Programmable Controllers
Foreword
• This manual contains text, diagrams and explanations which will guide the reader in
the correct programming and operation of the PLC.
• Before attempting to install or use the PLC this manual should be read and
understood.
• If in doubt at any stage of the installation of the PLC always consult a professional
electrical engineer who is qualified and trained to the local and national standards
which apply to the installation site.
• If in doubt about the operation or use of the PLC please consult the nearest
Mitsubishi Electric distributor.
• This manual is subject to change without notice.

Mitsubishi FX1S Series Specifications

General

Model	FX1S Series
I/O Points	10 to 30 points
Program Memory	2000 steps
Power Supply	AC
Communication	RS-422
Expansion	No expansion
Programming Language	Ladder Logic
Input Voltage	100-240V AC
Built-in High-Speed Counter	Up to 60 kHz (single-phase)
Weight	Approx. 0.3 kg
Dimensions	90 x 60 x 75 mm