Mitsubishi FX2N-10GM - Page 135

FX Series Positioning Controllers Program format 5
5-25
Program example
cod90 (ABS); Absolute drive method.
cod02 (CW)
x1000
y1000
i250
j250
f1000;
When interpolation instructions are executed consecutively, path operation is performed (Refer
to Section 5.4.2.).
(0,0)
500 1000
500
1000
Y axis
X axis
Peripheral
speed (f)
Start point
:present position
(500, 500)
Target position: Absolute (ABS) position
(1000, 1000)
Radius (r) = 500-incremental
specification
Center
(Does not have to be specified)