Mitsubishi FX2N-10GM - System Configuration

FX Series Positioning Controllers Introduction 1
1-16
1.5 System Configuration
The figure below shows the system configuration to use the positioning unit.
*1:Software for personal computer
FX-PCS-KIT-GM-EE :Applicable personal computer PC-AT compatible machine.
Applicable OS MS-DOS.
FX-PCS-VPS/WIN-E :Applicable OS Windows 95. Windows 98 Windows NT4.0.
Connection cables and terminal blocks
c
Cable to connect E-20TP-E
E-20TP-CAB0 (3 m, packed together with E-20TP-E-SET0)
FX-20P-CAB0 (1.5 m, sold separately)
d
RS-232C cable to connect personal computer
F
2
-232CAB (25 pins
↔
25 pins) (packed together with FX-PCS-KIT-GM-EE)
F
2
-232CAB-2 (half-pitch 14 pins
↔
25 pins) (sold separately)
e
RS-422 cable to connect personal computer (packed together with FX-PCS-KIT-GM-EE)
FX-422CAB0
f
Cable to connect servo amplifier/drive unit (sold separately)
Cable to connect MR-C E-GMC-200CAB (2 m)
Cable to connect MR-J E-GMJ-200CAB (2 m)
Cable to connect MR-J2 E-GMJ2-200CAB1A (2 m)
Cable to connect MR-H E-GMH-200CAB (2 m)
Cable to connect general-purpose drive unit E-GM-200CAB (2 m)
(relayed by terminal block FX-16E-TB)
FX
2N
-10GM
FX
2N
-20GM
Programming tool E-20TP-E
Personal computer
*1
(E-20TP-E-SET0 sold separately)
Connection cable
Servo amplifier/drive
unit (manufactured
by Mitsubishi or for
general-purpose)
General-purpose I/O equipment/
terminal block
Motor
(manufactured by
Mitsubishi or for
general-purpose)
FX-232AW(C)
(packed together with
FX-PCS-KIT-GM-EE)
c
Connection cable
f
Connection cable
g
RS-232C cable
d
RS-422 cable
e
h