Mitsubishi FX2N-10GM - FNC12 (MOV): Transfer; 10 FNC13 (MMOV): Magnification Transfer

FX Series Positioning Controllers Program format 5
5-53
5.10.9 FNC12 (MOV): Transfer
5.10.10 FNC13 (MMOV): Magnification transfer
• In the example above, b15 of D4 is transmitted to b15 to b31 of (D7/D6), and the data of
(D7/D6) becomes a negative value (the same as D4).
FNC 12
MOV
Applicable models
Series name
16-bit operation
5 steps
Remarks
K,H KnX KnY KnM D V,Z
Applicable
devices
and basic
format
Word
devices
FNC 12
MOV
FX
2N
-10GM
FX
2N
-20GM
MOVE
MOV
[D]MOV
Transfer
Transfer
source
Transfer
destination
When the drive input is ON, the data of
is transmitted to without any
change.
When the drive input is OFF, the
contents of remain unchanged.
D·
D·
Drive
input
S·
D·
S· D·
S·
32-bit operation
8 steps
FNC 12
MOV
K100 D11
X22
When the X22 is turned ON, K100 is
transmitted to the D11.
·
FNC 13
MMOV
Applicable models
Series name
16-bit operation
5 steps
Remarks
K,H KnX KnY KnM D V,Z
Applicable
devices
and basic
format
Word
devices
FNC 13
MMOV
FX
2N
-10GM
FX
2N
-20GM
MAGNIFY
MOVE
MMOV
[D]MMOV
Magnification transfer
The data in the 16-bit device is transmitted
to the 32-bit device with the specified sign
bit repeatedly duplicated.
D·
Drive
input
S·
D·
S· D·
S·
(not Z.)
(not V.)
32-bit operation
8 steps
Transfer
source
16-bit
Transfer
destination
32-bit
FNC 13
MMOV
D 4 D 6
X23
When X23 is turned ON, the data in D4 is
transmitted to D6 and D7.
·
01 11111000011101
0111111000011101
1111111111111111
(D4)
(D7, D6)
b0b15
b0b31 b15b16
Sign (0:Positive, 1:Negative)
Sign (0:Positive, 1:Negative)