Mitsubishi FX2N-10GM - Page 29

FX Series Positioning Controllers Introduction 1
1-17
g
Connection cable to connect general-purpose I/O equipment/terminal block (sold sepa-
rately)
FX-16E-150CAB: Flat cable with connector on each end (1.5 m)
FX-16E-300CAB: Flat cable with connector on each end (3.0 m)
FX-16E-500CAB: Flat cable with connector on each end (5.0 m)
FX-16E-150CAB-R: Round multi-core cable with connector on each end (1.5 m)
FX-16E-300CAB-R: Round multi-core cable with connector on each end (3.0 m)
FX-16E-500CAB-R: Round multi-core cable with connector on each end (5.0 m)
FX-16E-500CAB-S: Cable with connector on only one end (5.0 m)
h
Terminal block (sold separately)
For positioning unit/extension block:
FX-16E-TB, FX-32E-TB
For extension block (cannot be connected to positioning unit):
FX-16EY
…
-TB (
…
= R, S or T), FX-16EYT-H-TB