Mitsubishi FX2N-10GM Hardware / Programming Manual

Foreword
• This manual contains text, diagrams and explanations which will guide the reader in the cor-
rect installation and operation of the communication facilities of FX
2N
-10GM, FX
2N
-20GM unit.
For programming instructions please refer to the E-20TP OPERATION MANUAL and FX-PCS-
KIT-GM-EE SOFTWARE MANUAL.
• Before attempting to install or use the communication facilities of FX
2N
-10GM, FX
2N
-20GM
unit this manual should be read and understood.
• If in doubt at any stage of the installation of the communication facilities of FX
2N
-10GM,
FX
2N
-20GM units always consult a professional electrical engineer who is qualified and
trained to the local and national standards which apply to the installation site.
• If in doubt about the operation or use of the communication facilities of FX
2N
-10GM, FX
2N
-
20GM units please consult the nearest Mitsubishi Electric distributor.
• This manual is subject to change without notice.
FX/E Series Positioning Controllers

Mitsubishi FX2N-10GM Specifications

General

Brand	Mitsubishi
Model	FX2N-10GM
Category	Controller
Language	English