Mitsubishi L Series User Manual

129
CHAPTER 9 DISPLAY UNIT
9
9.1 Display Unit
CHAPTER 9 DISPLAY UNIT
This chapter describes the functions of the display unit that can be used with the A/D converter module.
For instruction on operating the display unit, or for details on the functions and menu configuration, refer to the
following.
MELSEC-L CPU Module User's Manual (Function Explanation, Program Fundamentals)
9.1 Display Unit
The display unit is an LCD to be attached to the CPU module. By attaching it to the CPU module, you can check the
status of the system and change system settings without the software package.
In addition, in the event a problem occurs, you can identify the cause of the problem by displaying the error
information.
For details on how to check and clear an error from the display unit, refer to the following.
• Checking/Clearing an Error ( Page 138, Section 9.4)
9.2 Menu Transition
(1) Organization
The diagram below shows how the "MOD MON/TEST" and "MOD SETTINGS" menus are organized.
DIGITALCLIP
INPUT SIG ENH
CONVERSION SPD
COMMON
CPU MON/TEST
CPU SETTINGS
MOD MON/TEST
SPECIFY I/O No.
BUF MEM MON/TES
INIT CHANGE
CH1
CH2
CH3
CH4
A/D CONVERSION
AVE PROCESSING
TIME/COUNT/MOV
SCALING
SCALE UP LIMIT
SCALE LOW LIMIT
PROCESS ALARM
PRALARM UPR/LWR
PRALARM UPR/UPR
PRALARM LWR/LWR
PRALARM LWR/UPR
INPUT SIG ERR
INPUT SIG VALUE
SHIFT
MODULE LIST
SPECIFY I/O No.
MODULE LIST
MOD SETTINGS
USER MESSAGE
OPTIONS

Mitsubishi L Series Specifications

General

Brand	Mitsubishi
Model	L Series
Category	Engine
Language	English