147
CHAPTER 10 PROGRAMMING
10
10.2 When Using the Module in a Standard System Configuration
Reads Warning output flag
(Process alarm).
Processing when a warning occurs for
CH2 process alarm lower limit value
Processing when a warning occurs for
CH2 process alarm upper limit value
Reads Input signal error detection flag.
Turns on input signal error reset signal.
Processing when CH1 input signal error
is detected.
Outputs the error code in BCD.
Turns off Error clear request.
Turns on Error clear request.
Process alarm occurrence status and processing at warning occurrence
Input signal error defection status and processing at error detection
Error code display and reset processing
Processing when a warning occurs
Processing when a warning occurs
Processing when an input signal error is detected
To Next Page
Loading...
Need help?
General
