EasyManuals Logo

Mitsubishi L2E Service Manual

Mitsubishi L2E
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background imageLoading...
Page #137 background image
137 / 155
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004
GLOW PLUG
ENGLISH
ELECTRICAL SYSTEM
ELECTRICAL SYSTEM
34 GLOW PLUG
34.1 Removal
Be careful not to damage the tip of glow plug when
removing. Glow plug tightening torque : 14.7 to 19.6
N·m (1.5 to 2.0 kgf·m) [10.85 to 14.47 lbf·ft]
34.2 Inspection
Check for continuity between the glow plug terminal
and body. If there is no continuity at all or large
resistance, replace the plug.
34.3 Installation
Tighten the glow plug to the specified torque.
Figure 148 Checking glow plug
14.7 to 19.6 N·m
(1.5 to 2.0 kgf·m)
[10.85 to 14.47 lbf ·ft]

Table of Contents

Other manuals for Mitsubishi L2E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi L2E and is the answer not in the manual?

Mitsubishi L2E Specifications

General IconGeneral
Engine ModelL2E
Number of Cylinders2
Starting SystemElectric starter
Lubrication SystemForced lubrication by trochoid pump
Cooling SystemWater-cooled

Related product manuals