Mitsubishi L2E Service Manual

65 / 155
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004
CAMSHAFTS (VALVE AND INJECTION
PUMP)
ENGLISH
ENGINE MAIN PARTS
14.4 Installation
When installing the camshafts, pay attention to the
following:
1. Apply oil to the bearings and cam lobes.
2. Reassembly sequence of the camshaft is the
reverse of disassembly.
3. Align the timing marks on the gears to the marks
on the idler gear.
4. After installation, check and adjust fuel injection
timing and valve clearances.
Figure 65 Installing valve camshaft

Mitsubishi L2E Specifications

General

Engine Model	L2E
Number of Cylinders	2
Starting System	Electric starter
Lubrication System	Forced lubrication by trochoid pump
Cooling System	Water-cooled