Mitsubishi L2E Service Manual

53 / 155
Service Manual Mitsubishi L-Series diesel engines
Version 08/2004
INLET MANIFOLD AND EXHAUST
MANIFOLD
ENGLISH
ENGINE MAIN PARTS
1. Check the mounting surfaces to the cylinder head
for flatness. The surfaces must be flat within 0.15
mm [0.0059 in.].
2. Check the manifolds for corrosion, damage and
cracks.
CAUTION
a. Check the interior of the inlet manifold for dust
and dirt.
b. If any dust is found, check the joints of the air
cleaner and inlet pipe for sealed condition.

Mitsubishi L2E Specifications

General

Engine Model	L2E
Number of Cylinders	2
Starting System	Electric starter
Lubrication System	Forced lubrication by trochoid pump
Cooling System	Water-cooled