Version 6 Terminal Menu System Options54
panel
Operation Mode: Normal
Metric Paper: Current = Yes
Black/White only: Current = No
Limited Disbs: Current = No
Small Size: 210mm x 297mm
Large Size: 420mm x 297mm
Delay Time: 3.0 seconds
For Vendor Mode 2
Vendor Mode: Current = Mode 2 - Vendor Mode 2
Polls Received: No - When the terminal is connected to the copier, the copier polls the
terminal every 10ms. No polls from the copier means that the copier is
switched off or there is a problem with the interface cable.
Colour Mode: Full Colour - Detection of Colour or B&W from the copier
Current Size: A4 - Paper size being used in the copier
Machine Status: Not Ready - Detection of whether the copier is ready to copy or not
Operation Mode: Copy
Metric Paper:Current = Yes
Black/White only: Current = No
Limited Disbs: Current = No
Small Size: 210mm x 297mm
Large Size: 420mm x 297mm
Delay Time: 3.0 seconds
For Management Mode
Vendor Mode: Current = Management - Management Mode
Polls Received: No - When the terminal is connected to the copier, the copier polls the
terminal every 10ms. No polls from the copier means that the copier is
switched off or there is a problem with the interface cable.
Colour Mode: Full Colour - Detection of Colour or B&W from the copier
Current Size: A4 - Paper size being used in the copier
Machine Status: Not Ready - Detection of whether the copier is ready to copy or not
Panel Copies: 1 - The number of copies currently dialed up on the copier panel
Operation Mode: Copy
Metric Paper:Current = Yes
Black/White only: Current = No
Limited Disbs: Current = No
Small Size: 210mm x 297mm
Large Size: 420mm x 297mm
Delay Time: 3.0 seconds
9 Xerox Copier (Visible when Xerox mode Enabled)
The Xerox status menu is only visible when the copier make and model has been set to Xerox.
Colour Mode: Black/White - What colour mode the copier is currently in
Current Size: A4 - What page size is currently chosen on the copier's operation panel
Machine: The status of the photocopier
Panel Copies: 1 - How many copies of the document is currently dialled up on the copier's display
panel
Metric paper: Current = Yes - Whether Metric or US/Imperial paper is in use
To Next Page
Loading...