Version 6 Terminal Menu System Options58
2 Configuration
All configuration options that are not received as part of a terminal setup from Supervisor Net.
1 Reset Terminal?: Yes/No
The reset menu has the following options:
Reset Terminal?: Yes/No
Are you sure Yes/No?
Reset to Factory Defaults? Yes/No
Clear Com Prof: Yes/No
Are you sure Yes/No?
Reset to Factory Defaults - Resets the optional configuration settings of the terminal to how they
were when originally manufactured.
Clear Com Prof - Clears all the communication settings including IP Address information and
terminal ID.
2 Setup Comms
The following are the available options in this sub-menu, and their default values:
1 Alter ID?: Current = 001
2 Main Port Device: None
Determines what is connected to the main serial port. See Main Serial Port Device for configuration
options and descriptions.
3 Aux Port Device: None
Determines what is connected to the Auxiliary serial port. See Aux Serial Port Device for
configuration options and descriptions.
4 Main Baud Rate?: Current = 9600
Main Serial Port's current Baud rate. See Main Serial Port Baud Rate for all possible settings.
5 Main Alter Parity: Current = N
Main Serial Port's Parity setting. See Main Serial Port Parity for a list of possible settings.
6 Aux Baud Rate?: Current = 9600
Auxiliary Serial Port's current Baud rate. SeeAuxiliary Serial Port Baud Ratefor all possible settings.
7 Aux Alter Parity: Current = N
Auxiliary Serial Port's Parity setting. See Auxiliary Serial Port Parity for a list of possible settings.
8 RTS Delay Time?: Current = 5
See RTS Delay Time for a full description of this setting.
9 Main Ignore Fr Er: Current = Disabled
See Ignore Frame Errors on Main Serial Port for a full description of this setting.
10 Aux Ignore Fr Err: Current = Disabled
See Ignore Frame Errors on Aux Serial Port for a full description of this setting.
To Next Page
Loading...