Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies Sec 1: 8-27
8.8.8 Servicing Back Chassis Assembly (M) – Top Display Version
Figure 8-36. Back Chassis Assembly (Top Display Version)
NOTE: There are No serviceable Components on the Back Chassis Assembly.
8.8.9 Servicing Main Housing (D) – Dual Display Version
Figure 8-37. Main Housing Assembly (Dual Display Version)
8.8.9.1 Top Label
NOTE: There is no need to remove any components in order to service the Top Label (2).
1. Scrape off the Top Label (2) with the Black Stick.
2. Clean the area once the Top Label is completely removed to ensure it is free of adhesive and
debris.
3. Replace with a new Label.
4. Remove the liner and place the label in the recess.
5. Press the label.
Back Chassis Assembly (46)
Top Label (2)
Front Housing Assembly (1)
FM Label (50)