11. Click the Security tab to configure security settings. Select the Enable Data Encryption option to enable
data to be encrypted when transmitted over the COM ports. After selecting the encryption option, select the
Keep connection option to start encrypting COM port communications immediately without restarting the
COM ports. (If your application will open/close a COM port frequently and the CN2600 is only used for one
host, you can enable this option to speed up the opening/closing time. However, this will result in your host
tying up the COM port so that other hosts cannot use it.) Select the Apply All Selected Ports option to
enable the security settings to be applied to all COM ports.
12. To save the configuration to a text file, select Export from the COM Mapping menu. You will then be able
to import this configuration file to another host and use the same COM Mapping settings in the other host.
To Next Page
Loading...
