RADIUS key: If you are using a RADIUS server for user authentication, enter its password here.
UDP port (default=1645): If you are using a RADIUS server, enter its UDP port assignment here.
RADIUS accounting: Use this field to enable or disable RADIUS accounting.
System Log Settings
System Log Settings allows the administrator to customize which network events are logged by the CN2600.
Events are grouped into four categories, known as event groups, and the administrator selects which groups to
log under Local Log. The actual system events that would be logged for each system group are listed under
summary. For example, if System was enabled, then System Cold Start events and Power Down events (for
2AC model) would be logged.
Group Event
System System Cold Start, System Warm Start, Power Down
Network DHCP/BOOTP/PPPoE Get IP/Renew, NTP, Mail Fail, NTP Connect Fail, DHCP Fail, IP Conflict,
Ethernet Link Down
Config Login Fail, IP Changed, Password Changed, Config Changed, Firmware Upgrade, SSL Key
Import, Config Import, Config Export
OpMode Connect, Disconnect, Authentication Fail, Restart
Auto Warning Settings
Event Settings
To Next Page
Loading...
Need help?
General
