The CN2600’s real time clock is powered by a lithium battery. We strongly recommend that you do not attempt
replacement of the lithium battery without help from a qualified Moxa support engineer. If you need to change
the battery, please contact the Moxa RMA service team.
Time zone (default=GMT Greenwich Mean Time): This field shows the currently selected time zone and allows
you to select a different time zone.
Local time: This field shows the time that you last opened or refreshed the browser. To set the local time for
the CN2600, click on the Modify… button, then submit your changes in the screen as shown below.
Time server: The CN2600 uses SNTP (RFC-1769) for auto time calibration. You may enter a time server IP
address or domain name in this optional field. Once the CN2600 is configured with the correct time server
address, it will request time information from the time server every 10 minutes.
Network Settings
Basic Network Settings
You can access Basic Network Settings by expanding the Network Settings item in the navigation panel.
Basic Network Settings is where you assign the CN2600’s IP address, netmask, Gateway, and other IP
parameters.
NOTE: You must assign a valid IP address to your CN2600 before it will work in your network environment. Your
network system administrator should provide you with a unique IP address and related settings for your
network. First-time users can refer to Chapter 3, Initial IP Address Configuration, for more information.
To Next Page
Loading...
Need help?
General
