Dynamic Mode
Dynamic mode integrates PPPD, SLIPD, and Terminal dial-in services. Dynamic mode automatically detects
which remote connection mode is being used, and provides corresponding services. You can individually
enable/disable PPP/SLIP/Terminal services by selecting Yes or No next to the corresponding option. Yes will
enable that type of service; No will disable it.
Authentication type (default=None): This field allows you to configure the method used, if any, to verify a
user’s ID and authorization.
Option Description
Local Verify the ID against the CN2600 User Table.
RADIUS Verify the ID against the external RADIUS server.
None Authentication is not required.
Disabled Mode
When the Application is set to Disable, the relevant port will be disabled.
To Next Page
Loading...
Need help?
General
