Moxa Technologies CN2600 Series User Manual

CN2600 Series Introduction
1-2
Package Checklist
All CN2600 dual-LAN terminal servers are shipped with the following items:
• CN2600 dual-LAN terminal server
• Power cord (AC models only)
• Document and Software CD-ROM
• Quick Installation Guide (English and Simplified Chinese versions)
• RJ45 Loopback Tester
• Product Warranty Statement
• Rackmount Kit (includes 2 brackets and 8 screws)
• Desktop Kit (includes 4 pads)
Product Features
The CN 2600 series has the following features:
• LCD panel for easy IP address configuration (excluding wide temperature models)
• Dual-LAN cards with two independent MAC addresses and IP addresses
• Redundant COM function available when both LANs are active
• Dual-host redundancy can be used to add a backup PC to your system
• Dual AC power inputs (AC models only)
• Real COM/TTY drivers for Windows and Linux
• Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
Product Specifications
Ethernet Interface
Number of Ports:
2 (2 IPs)
Speed:
10/100 Mbps, auto MDI/MDIX
Connector:
8-pin RJ45
Magnetic Isolation:
1.5 kV built-in
Serial Interface
Number of Ports:
8 or 16
Serial Standards:
CN2610: RS
-232
CN2650/2650I: RS
-232/422/485
Connector:
CN2610/2650: 8
-pin RJ45
CN2650I: DB9 male
RS
-485 Data Direction Control: ADDC® (Automatic Data Direction Control)
Serial Line Protection:
2 kV optical
isolation (CN2650I)
Console Port:
Dedicated RS-232 console port on rear panel (8-pin RJ45)
Serial Communication Parameters
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
RTS/CTS, DTR/DSR, XON/XOFF
Baudrate:
50 bps to 921.6 kbps
Pull High/Low Resistor for RS
-485: 1 kΩ, 150 kΩ
Terminator for RS
-485: 120 Ω

Moxa Technologies CN2600 Series Specifications

General

Brand	Moxa Technologies
Model	CN2600 Series
Category	Server
Language	English