Moxy MT 26 - Connecting Rods; Flywheel and Flywheel Housing

Engine
SHOP MANUAL MT26-31 - 06.2005
Tier-3 710655-
Ch 1 page 143
Connecting rods
Connecting rod and bearing cap marked 1 to 6.
Fitted with marking in.
Tightening torques
Oil sump bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Nm
Connecting rod bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Nm + 90°
Flywheel and flywheel housing
Flywheel
Maximum machining allowance for disc pressure surface: 2.0 mm
Ring gear
Heated to 100 - 150°C before fitting.
Tightening torques
Flywheel bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Nm + 90°
Bolts for flywheel housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M10: 50 Nm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M12 : 90 Nm