SHOP MANUAL MT26-31 - 06.2005
Engine
Tier-3 710655-
Ch 1 page 12
Engine identification
10 © Scania Industrial & Marine Engines 2005-11:1
TYPE DESIGNATIONS
The engine type designation indicates, in the form of a code, the type of
engine, its size and applications, etc.
The type designation and engine serial number are stamped on the right side
of the engine block. See illustration.
DC 9 63 A 02 P
Type
DC Supercharged diesel engine with air-cooled charge air cooler.
Displacement in whole dm
3
Performance and certification code
Indicates, together with the application code, the normal gross engine
output.
The actual output setting of the engine is indicated on the engine card.
Application
A For general industrial use
Variant 01-99
Type of regulator
P EMS engine management system with PDE and S6
The engine designation indicates, in the form of a code, the type of
engine, its size and applications, etc.
The type designation and engine serial number are indicated on a
type plate affixed to the right-hand side of the engine.
The engine number is also stamped on the engine block immedi-
ately above the type plate.
Refer to the illustration.
To Next Page
Loading...