TRANSMISSION
Ch 2 page 28 Ch 2 page 29
TRANSMISSION
SHOP MANUAL MT26/31 - 08.2006 SHOP MANUAL MT26/31 - 08.2006
TRANSMISSION
Ch 2 page 28 Ch 2 page 29
TRANSMISSION
SHOP MANUAL MT26/31 - 08.2006 SHOP MANUAL MT26/31 - 08.2006
Display EE Indication on the Display: EE . In this state, the Display has a
timeout, i. e. it receives no Data from the EST-37.
Main reasons:
− EST-37 is in TOTAL RESETTING MODE
(e.g. because of output train disconnection or exter-
nal power supply at the lines to the gear-solenoid
valves).
− EST-37 without supply
− Data line not correctly connected, etc.
Error code definition:
The error codes are composed of two hexadecimal
numbers.
The first number indicates the type of signal, the second
number the signal and the type of error.
Look in the shop manual chapter 2.5 Troubleshooting, Fault finding code list
f
a
d
Left side
Right side
g
b
c
e
To Next Page
Loading...