MSENSE
®
DGA 9 7045899/02 EN – 11.2020 Page 112
In the “Modem type” field, the following modem selection can be made using the Enter key:
• None
• DNP3-GW (internal) (6.10.4.5.2.1)
• IEC61850-GW (int.) (6.10.4.5.2.2)
In the field RS232 link the following selection can be made using the enter key:
• auto-detect
• RS232 connector
• Modem socket
The RS232 link function is used for the internal switching of the RS232 interface to:
• RS232 socket: Real RS232 interface on ST4 of the measuring and controller card. Today, this
interface is hardly needed any more, given that the MSENSE® DGA 9 has an Ethernet inter-
face.
• Modem socket: On-board modem (BU4 and ST6). The plug ST6 on the measuring and control
card is for MR service purposes only!
6.10.4.5.2.1 DNP3 Modem
When selecting DNP3-GW (internal), the following appears on the LCD display:
No additional settings can be made here.
The following functions are available:
To Next Page
