USER MANUAL NOVAplus
MRU GmbH, D-74172 Neckarsulm 44 / 95
7 Performing measurement
In the basic configuration, each analyzer has the complete functionality
you need for gas measurement.
The process of gas measurement is described below.
The description of other optionally available measuring programs can
be found in the appendix or on separate supplementary sheets.
When using the optional soot probe make sure that no
soot test paper is inserted in your probe handle when
performing a flue gas measurement.
7.1. Selecting the measuring program
Wrong measuring results
The extracted flue gas must be able to evacuate the ana-
lyzer without obstruction.
► The exhaust outlet at the rear of the analyzer may
never be covered during a measurement, never oper-
ate the analyzer in a transport case.
Rick due to toxic gases
There is a risk of poisoning.
Noxious gases are sucked in by the measuring device
and released into the ambient air.
► Only use the measuring device in well ventilated
spaces.
To Next Page
Loading...
