USER MANUAL NOVAplus
MRU GmbH, D-74172 Neckarsulm 67 / 95
► With F2 = "measured value" are displayed the measured data of the
stored measurement in detail, available in 3 measuring value pages,
as they are defined in the measuring value window.
► With ESC you return to the context information of the measurement.
You have the possibility to display only those data that are assigned
to a single site:
• either F1 = „this site“ , while a measurement of the desired site is
displayed. With F1 = „all sites“ you cancel this filter again.
• or while you select with the menu key the function "search a site"
and execute, as described in the chapter site administration.
Deleting measurements
You are able to
• delete single measurements, while they are displayed – press the
key F3 = "delete" .
• or delete all measurements of a measuring type.
► Go to the Storage menu.
► Select Delete measurements.
The menu Delete measurements appears.
► Select which measurement type you want to delete.
► Press F2.
A message appears.
Select continue to delete all measurements.
Select abort to retain all measurements.
► Press OK.
Depending on the selection, the measurement data are deleted or
retained.
To Next Page
Loading...
