USER MANUAL NOVAplus
MRU GmbH, D-74172 Neckarsulm 66 / 95
The created file has a column header with the following information:
Site number, Date/Time, Measuring program name, Fuel type, CO2max,
O2reference, and all measured values that the analyzer can measure as
well as the soot numbers, Derivate and T-Boiler.
Example:
Exporting differential pressure measurements
The same function as Export of combustion tests only the file name is different.
The created file has the file name “DDMxxxxx.csv“, in which the xxxxx are con-
tinuing 5-digit numbers with leading zeros.
The created file has a column header with the following information: Site
number, Date/Time, as well as 4 saved pressure measurements.
8.4. Measurements in Data storage
Viewing Measurements
In the menu item „View measurements“ you can inspect the stored
measurements. After selection of this item you receive first an overview
of the number of the stored measurements according to measuring
type.
► Go to the Storage menu.
► Select View measurements.
► Press OK
The menu View measurements appears.
An overview of the number of stored measurements according to
the measurement type appears.
► Select the desired measurement type.
► Press F2.
Then you receive first a page with context information to the
stored measurement. Scroll with the arrow keys by the context in-
formation of the stored measurements.
To Next Page
Loading...
