USER MANUAL NOVAplus
MRU GmbH, D-74172 Neckarsulm 58 / 95
8 Data Storage
8.1. Organizing data storage
Basis of the data memory of the analyzer is a set of sites stored in the
device. Every site exists of a unique site number and 8 freely usable text
lines which can have, e.g., the address, customer name etc.
The device can store up to 4000 different sites.
Sites can be created in the device and be changed, or could be im-
ported from a PC program. Attention: sites created in the device and
site data changed in the device will not be updated towards the PC. The
device does only transmit to the PC the measurement values, but no in-
formation about site data.
Measurements are stored by assigning them to a site. Measurements
can be, on this occasion, singles flue gas measurements or other meas-
uring programmes available in the device.
8.2. Calling up information about data storage
In the menu item "storage" you select „memory info“ get information
about the actual memory volume. The part of free memory, the total
number of the stored sites and the number of the measurements stored
all together, split in the kind of the measurement is listed.
► Press F2
The Storage menu appears.
► Select Memory info.
The menu Memory info appears.
Information about the data storage is listed.
To Next Page
Loading...
