mru NOVAplus - Page 54

USER MANUAL NOVAplus
MRU GmbH, D-74172 Neckarsulm 54 / 95
► Before using this function, it must be switched on in the Measure-
ment settings.
► Go to the Extras menu.
► Press F3.
 The menu Analyser settings appears.
► Press F3.
 The menu Measurement settings appears.
► Switch Soot&T-boiler ON.
► After a successful measurement, you can enter the externally deter-
mined measured values.
NOTE
The input possibility of soot values and derivate is given
only with the fuel oil.
► Press F2.
 The menu Enter appears.
► Enter the determined values for T-boiler, Soot no. 1, Soot no. 2, Soot
no 3 and Derivative.
► Press F1 to make a printout.
► Press F2 to store the measurement.