Munters Element - 17 Monitoring Functions; Viewing the Temperature Data; Viewing the Humidity Data; Viewing the Water History

© Munters AB, 2018 78
17 Monitoring Functions
•
Viewing the Temperature Data
•
Viewing the Humidity Data
•
Viewing the Water History
•
Viewing the Heater History
•
Viewing the Alarm History
•
Viewing the Event History
17.1 Viewing the Temperature Data
This screen displays the farms temperature data by growth day. Data on this screen is read only.
NOTE Performing a Cold Start or selecting a New Group erases the data.
17.2 Viewing the Humidity Data
This screen displays the farms humidity data by growth day. Data on this screen is read only.
NOTE Performing a Cold Start or selecting a New Group erases the data.
17.3 Viewing the Water History
Go to this screen to view the amount of water distributed.
17.4 Viewing the Heater History
Go to this screen to view the heater activities.
17.5 Viewing the Alarm History
Go to this screen to view the last 999 alarms. Alarms history can display the following alarms.
•
Unknown Alarm
•
Low /High Temperature
•
Sensor # Low/High
•
Temperature
•
High/Low Pressure
•
Water Overflow
•
Water Shortage
•
Outside Temperature Failure
•
Temperature Sensor # Failure
•
Humidity Sensor Failure