Cleaning 125
[4]
Check the print result.
• If you find missing or thin lines on the print, go to "Performing Head cleaning" P. 124.
• If all lines are clearly printed, you can start printing.
Note
• If nozzle missing persists after repeating normal cleaning several times, perform Long cleaning.
• If several Long cleaning does not help to recover nozzles, perform
"Cleaning of cleaning wiper" P. 126 or "Cleaning around the print head"
P. 131.
• If nozzle missing still persists, perform Little Charge from “Menu 3 Cleaning” > “Select Print Head” > “Cleaning Type”.
"Menu3: Cleaning" P. 98
Y KMLmM CC Lc
WH WH WH WH WH WH WH WH
1
2
To Next Page
Loading...
